Mitsubishi F940GOT-SWD-E Operation Manual page 20

Graphic Operation Terminal F940GOT
Mode Function
Condition
setting
Sampling
Result
mode
display
Data clear §The sampling data can be cleared.
Status
display
History
Alarm
mode
Frequency
History
clear
Screen list
Data file
Test
mode
Debug
operation
Time
switch
PC
transfer
Printer
output
Other
mode
Entry code
Environ-
ment
setting
Note 1: External characters and comments can be created using the screen creation soft-
ware (FX-PCS-DU/WIN-E).
Note 2: The function is valid only when the FX-PCS-DU/WIN-E is used.
* When the PLC is connected via a computer link unit, some functions are restricted.
Outline of function
§Conditions of up to four devices to be sampled
and the sampling start/end time can be set.
§The sampling result can be displayed in the form
of list or graph.
§Alarms currently occurred are displayed in the list
in the order of occurrence.
§The alarm history is saved together with the
occurrence time in the order of occurrence.
§The number of occurrences of each alarm is
stored.
§The alarm history is deleted.
§User screens are displayed in the order of screen
No.
§The data used in the recipe function can be
changed.
§The operations can be checked to know whether
key operations, screen changeover, etc. have
been correctly performed on the displayed user
screen.
§A specified bit device can be kept ON for a spec-
ified time.
§The screen data, the data sampling result and
the alarm history can be transferred between the
GOT and the screen creation software.
§The sampling result and the alarm history can be
output to a printer.
§The entry code to protect programs in the PLC
can be registered.
§The initial setting can be specified for the system
language, the connected PLC, the serial transfer,
the title screen, the menu screen call, the current
time, the backlight extinguishing time, the buzzer
sound volume, the LCD contrast, the screen data
clear, etc.
Introduction 1
Reference
Remarks
sections
5
6
7
Note 2
8
1-6