Data Transfer - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
8.3

DATA TRANSFER

The screen data, the sampling data and the alarm history can be transferred (read/written)
between the GOT and a peripheral unit for screen creation (personal computer).
u u u u Basic operation
• By the following operation, the DATA TRANSFER screen is displayed.
The following screen is displayed also without regard to the screen displayed at that time
when the screen data is transferred from a personal computer to the GOT. And when trans-
fer is finished, the screen No. 0 is displayed when the DU/WIN-E is used or the screen No. 1
is displayed when the GOT-A900 is used.
The OTHER MODE
screen is displayed.
Paragraph 8.1
[ DATA TRANSFER ]
[ DATA TRANSFER ]
GOT <--> PC
n n n n Important point
1 Data transfer to personal computer during sampling
Have in mind the following contents when transferring the data from/to a personal com-
puter while sampling is performed.
- PC à GOT
- PC ß GOT
- PC ßà GOT : Sampling is continued, and the acquired sampling data is saved in
DATA TRANSFER
Select "DATA
TRANSFER" on the
screen.
END
WAITING
: Sampling currently performed is aborted.
The sampling data acquired so far is saved.
: Sampling is continued, and the acquired sampling data is saved.
the same way as "PC ßà GOT".
The DATA TRANSFER
screen is displayed.
The screen shown below
is displayed.
Other Mode 8
8-3