Print Out - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
8.4

PRINT OUT

The sampling data and the alarm history an be printed.
Because the communication setting can be performed in accordance with each printer, diversi-
fied printers equipped with RS-232C interface can be used.
The communication setting for the printer can be performed in "SET-UP MODE" in the GOT or
using the screen creation software.
Connect a printer.
Perform the printout
operation in the GOT.
Select the printout data
and execute printout
(procedure shown below).
uBasic operation
Printer output
setting
The screen
shown below is
displayed.
*1 Print end No., do not enter a numeric larger than the value displayed on the screen. (The
value displayed on the screen indicates the total number of sampled data.)
[ PRINT OUT ]
[ PRINT OUT ]
SAMPLING DATA
ALARM HISTORY
• Connect a printer to the GOT, and power up.
• Manipulate the GOT, and select "PRINT OUT" on the OTHER
MODE screen.
• Select the data to be printed out.
The sampling data and the alarm history are available.
For the sampling data, the print range can be set.
SAMPLING DATA
Select "SAMPLING DATA".
ALARM HISTORY
Select "ALARM HISTORY".
Screen
END
0 to 9 ENT
Print start No.
1)
1) NO
When canceling
the printout.
YES
When starting
the printout
Other Mode 8
0 to 9 ENT 1)
Print end No. *1
The PRINT OUT
screen is displayed.
The screen shown on
the left is displayed
again.
8-4