10.5.10 Buzzer - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT

10.5.10 Buzzer

The "Buzzer" object issues buzzer sounds in the GOT when a specified bit device in the PLC
becomes ON.
u u u u Contents of setting
Attribute
Bit Device
Mode
u u u u Contents of operation
One Time: When a specified bit device becomes ON from OFF, a short buzzer sound is issued
once (in the same way as when a key is pressed).
Three Times: When a specified bit device becomes ON from OFF, a short buzzer sound is
issued three times (in the same way as when an error has occurred).
Continuous: When a specified bit device becomes ON from OFF, buzzer sound is issued con-
tinuously.
n n n n Important point
• Sequence program
If the ON time of a specified bit device is extremely short (such as in a high-speed input or a
device converted into a pulse), the GOT may not recognize the ON status.
The GOT refers to the ON/OFF status in the PLC at every 200 to 300 ms. A bit device spec-
ified in the "Buzzer" object should remain ON for 300 ms or more.
Enter a bit device to be referred to.
Select one among "One Time", "Three Times" and "Continuous".
Creation of Display Screens (FX-PCS-DU/WIN-E) 10
Contents of setting
10-58