Active State Monitor - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
4.6

ACTIVE STATE MONITOR

Up to eight state Nos. in the ON status can be monitored.
This function is valid in the FX Series only.
u u u u Basic operation
The HPP MODE
screen is displayed.
Paragraph 4.1
[ ACTIVE STATE MONITOR ]
[ ACTIVE STATE MONITOR ]
S 100
S 400
S 800
• When there are not state Nos. in the ON status, the message "NO ACTIVE STATE" is dis-
played.
• When the special auxiliary relay M8047 (step ladder monitor valid) is not ON in the
sequence program, the message "M8047 IS NOT ON" is displayed.
• When there are more than 8 state Nos. in the ON status, all 8 Nos. are displayed from the
smallest one in the ascending order. Excessive state Nos. are not displayed.
ACTIVE STATE
MONITOR
Select "ACTIVE
STATE MONITOR".
END
a)
S 200 S 300
S 500 S 600
S 900
a) Active state
State Nos. in the ON status are displayed in the
list.
HPP Mode 4
4-18