Mitsubishi F940GOT-SWD-E Operation Manual page 138

Graphic Operation Terminal F940GOT
2) Setting in the SW¨D5C-GOTRE-PACK
In overlay, use word devices for "Change Screen".
Set the base screen No. and the overlaying screen (= overlap window) Nos. in accordance
with the contents of the word devices set in "Change Screen".
Setting of word devices for screen changeover
Base screen:
Overlap window 1: Word device (The initial value is not set.)
Overlap window 2: Word device (The initial value is not set.)
The base screen, the overlap window 1 and the overlap window 2 can be specified using
arbitrary word devices. (The word devices may not be consecutive.)
When overlay is not performed, enter "0" to the specified devices or perform setting so that
overlap windows are not used.
The screen Nos. currently displayed can be checked using "Write Device" in "System Infor-
mation" in the screen creation software. (Refer to Paragraph 9.6.)
Write devices: Head word device
The specified screens are overlaid as shown below.
Base
screen
Screen No.
Screen No. Screen No.
Screen No.
Screen No. Screen No. Screen No. Base screen + Overlap window 1 + Overlap window 2
Word device (The initial value is set to D0.)
"Head + 1" word device
"Head + 2" word device
Overlap Overlap
window 1 window 2
0 0
0
0 Screen No. Base screen + Overlap window 1
Base screen
Base screen + Overlap window 1
Creation of Display Screens 9
9-20