Mitsubishi F940GOT-SWD-E Operation Manual page 82

Graphic Operation Terminal F940GOT
• The data acquired by sampling can be used not only in the sampling mode but also in the
following ways.
- In the screen mode (in which user screens are displayed), the system screens for the
condition setting and the result display of the sampling mode can be displayed.
- In "PRINT OUT" on the OTHER MODE screen, the sampling data can be printed out.
When the sampling data is read using the screen creation software, the sampling data
can be output to a printer connected to a general-purpose computer.
- The sampling data can be saved to FDs and the HD using the screen creation software.
- The saved sampling data can be converted into the text format (.txt) using the screen
creation software FX-PCS-DU/WIN-E. In this way, the sampling data can be processed
using a commercial software.
n n n n Important point
1) The registered sampling condition and the acquired sampling data are backed up by the
battery. Even when the power of the GOT is turned off, the setting contents are stored.
2) If a function shown below is selected while sampling is performed, the task may be paused
or aborted and the sampling data may be cleared. The sampling data can be cleared by set-
ting a control bit device to ON or selecting "CLEAR DATA" on the SAMPLING MODE
screen. (Refer to Paragraph 5.4.)
Mode
Current time
Other mode
Transfer to PC *1
Read/collation
Transfer to PC *1
Write
*1 Communication with the screen creation software such as transfer of user screen data
3) The sampling condition related to time is managed by "SET TIME SWITCH" in "SET-UP
MODE".
Accordingly, when performing sampling related to time, make sure that the time is correct,
then start sampling.
Function
Sampling is paused while the time
is set. (Sampling is continued when
the time is displayed but not set.)
Sampling is continued.
Sampling is aborted.
Sampling
Sampling Mode 5
Sampling data
The data acquired until sampling is
paused is saved. When time setting
is finished, the data starts to be
acquired again.
The sampling data is saved even
while data is being read and col-
lated.
The data acquired until sampling
aborted is saved.
5-2