Recipe Function - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
12.8

Recipe function

The GOT have built-in registers which correspond to 4,000 16-bit word devices in the PLC. By
setting to ON/OFF a bit device in the PLC, the data in the GOT can be read from/written to a
specified word device in the PLC.
By using the recipe function, the initial setting data such as machine processing data and posi-
tioning data can be transferred to the PLC.
• The recipe function can be set in "Recipe" in "Common" in the screen creation software.
Screen of screen creation software
Recipe
a) No.
a) Recipe No.
This is a recipe file No. Two or more recipe files can be created as far as the total number
of devices is 4,000 or less.
b) Recipe Name
Enter an arbitrary recipe name.
The recipe name is used to facilitate recognition of each recipe in the screen creation
software. The recipe name cannot be displayed on the GOT screen.
c) Device
Enter the head of word devices in the PLC to which the data in the GOT is transferred.
Word devices starting from the head word device as many as the specified number of
devices (4) Number) are occupied.
Devices can be set using the EDIT key 5).
Recipe Name
b) c)
Creation of Display Screen (SW¨ ¨ ¨ ¨ D5C-GOTRE-PACK) 12
Device
12-37