Mitsubishi F940GOT-SWD-E Operation Manual page 162

Graphic Operation Terminal F940GOT
u u u u Display example
• The displayed text is changed in accordance with the ON/OFF status of the limit switches L1
to L3 provided in the carrying line shown below.
LS1
Zero point
Workpiece
• The "Library Text" object is used in this example. To specify the text No. stored in the text
library, the data register D10 is used.
- Library Text
Word Device
Data Size
Displayed Value : Current
• Sequence program
LS1
MOV
LS2
MOV
LS3
MOV
• Display in the F940GOT
STARTING POINT POSITION
The display start point is fixed without regard to the length of the displayed text.
LS2
Intermediate point
: D10
: 16 bits
K20 D10
Transfers the text No. 20 to D10.
K21 D10
Transfers the text No. 21 to D10.
K22 D10
Transfers the text No. 22 to D10.
LINE
When the switch LS1 becomes ON, "Zero point" is displayed.
When the switch LS2 becomes ON, "Intermediate point" is displayed.
When the switch LS3 becomes ON, "Finished" is displayed.
Creation of Display Screens (FX-PCS-DU/WIN-E) 10
LS3
Final point
- Text library
0
20 Zero point
21 Intermediate point
22 Finished
Text No.
10-14