Forced On/Off - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
4.4.3

Forced ON/OFF

Bit devices (Y, M and S) and word devices (T and C) can be forced ON/OFF. When T, C, D, V or
Z is forcedly set to OFF, its current value is reset to "0".
u u u u Basic operation
Y/M/S/T/C/D/V/Z
monitor display
Paragraph 4.1
Operation example
Forced ON/OFF of output Y0 and auxiliary relay M0
Display Y0/M0
monitor using the
procedure described
in Paragraph 4.4.1.
Display the ON screen 1.
Y 000
DEVICE
SET COMMENT
,
Move the cursor to a
device to be forcedly
set to ON/OFF.
ON
ON Move the
Display the cursor to
ON screen 1. M0.
M 0
ON OFF
ON
ON
OFF
OFF
ON OFF
ON Move the OFF
Display the cursor to
ON screen 2. Y0.
Display the ON screen 2.
Y 000
DEVICE ON
SET COMMENT
OFF
Move the OFF
cursor to
M0.
M 0
OFF
4-16
HPP Mode 4