Mitsubishi F940GOT-SWD-E Operation Manual page 33

Graphic Operation Terminal F940GOT
In the case of NJ-RS2
Switches on rear face
Set item
Mode
Communication
condition
NJ-CPU-B16 Setting by parameter (50H)
Parameter (50H): 0057H
• When connecting the FLEX-PC, have in mind the following restrictions.
- The set values of timers (T) and counters (C) cannot be monitored nor changed.
- When the RS-232C is connected, the printer output function of the GOT is disabled.
Description
MODE. SW 1
1 : OFF
DIP . SW
2 to 8 : ON
Communication speed: 19,200 bps
Stop bit: 1 bit
Character table: 8 bits
Parity: Odd
Remarks
Set by command, start-stop
synchronization
Set by switch
19,200 bps, 7 data bits, 1 stop bit, even parity
Introduction 1
No-procedure
1-19