Creation Of Display Screen (Sw¨d5C-Gotre-Pack); Element List - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
Creation of Display Screen (SW¨ ¨ ¨ ¨ D5C-GOTRE-PACK)
12.
This section describes the elements constructing user screens created using the screen cre-
ation software for GOT-A900 (SW¨D5C-GOTRE-PACK).
Created user screens are displayed in the screen mode described in Section 3. For specifica-
tion of screens to be displayed, refer to Section 13.
12.1

Element list

The elements constructing user screens are referred to as "Figures" and "Objects" in the
screen creation software for GOT-A900 (SW¨D5C-GOTRE-PACK).
u u u u Display example
The figures below show display examples of the screen.
Only some objects are used in the examples below. Have in mind some objects are displayed
on the screen and others are not.
g)
F940GOT
13:29:05
h)
f)
Figures: Display figures and characters in specified positions.
Figure
Text
Line
Rectangle
Circle
Figure Data
n n n n Important point
Refer to detailed set items of each figure/object (Refer to the HELP file in the creation software
file for the attribute.), then set each figure/object.
b)
MITSUBISHI
PRODUCTION SITUATION
56238
RUN STOP
e)
Displays characters such as alphabets, numerics, Katakana,
Hiragana and Kanji (JIS level 1) and symbols.
Displays a straight line connecting specified two points.
Displays a rectangle whose every edge is 90^. The rectangle can
be filled.
Displays a circle. The circle can be filled.
Displays a figure in the BMP or DXF format.
Creation of Display Screen (SW¨ ¨ ¨ ¨ D5C-GOTRE-PACK) 12
a)
SENDING AMOUNT SETTING
a)
STATION 1
STATION 2
c)
5 6
d)
0 1
Description
a)
1000mm
2000mm
7 8 9 - SET CLR
2 3 4
Use example
12-1
c)
h)
ENT
a), b)
f)