Operation Of Screen Changeover - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
11.2.2

Operation of screen changeover

The "Change Screen" object can be registered for each individual screen or for all screens
(common setting).
• Registration of the "Change Screen" object
- Setting for individual screens
The setting is effective only while the registered screen is displayed.
Up to 50 objects in total can be registered including the "Change Screen", "Switch",
"Send Data Bank", "Increment", "Decrement" and "Data Setting" objects.
- Common setting for all screens
The setting is effective on any screen.
Up to 50 objects in total can be registered including the "Change Screen", "Switch",
"Send Data Bank", "Increment", "Decrement" and "Data Setting" objects.
* Up to 50 objects in total can be registered including the setting for individual screen
and the common setting for all screens.
Condition
"Control Input"
- Touch key
When both "Control Input" and "Bit
Device" are satisfied, the display
screen is changed over.
+
"Bit Device"
- Bit device
in PLC
- No condition
Changeover of Display Screen (FX-PCS-DU/WIN-E) 11
"Direct"
"PLC data register"
"DU memory"
Specify a screen No. to be displayed next.
- A screen directly entered
here is displayed next.
- A screen specified by data
registers in the PLC is
displayed next.
- A screen No. stored in the
GOT memory is displayed
next.
11-4