Screen Mode; Outline Of Screen Mode - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
3.

Screen Mode

This section describes the screen mode in which user screens are displayed.
Confirm the outline of and the operating procedures in the screen mode.
For the contents related to the screen design, refer to Sections 9 to 13.
3.1

Outline of screen mode

In the screen mode, screens created by the user using the screen creation software are dis-
played. In addition, alarm messages are displayed.
On one display screen, characters, straight lines, rectangles, circles, etc. which are classified
in accordance with their functions are combined and displayed.
When there are two or more user screens, they can be changed over using the operation keys
in the GOT or using the PLC. (The user can set arbitrarily the condition to change over the
screens and the screen to be displayed next.)
On one screen, the following elements can be displayed. (In the display example below, only a
part of the available functions are used.)
Circle
Time
Indicator (reverse)
In the F940GOT-SWD-E, eight colors are available to create screens.
Examples of display screen
MITSUBISHI
F940GOT
13:26:05
START STOP
MONITOR
56238
0:EMS
Rectangle
Screen Mode 3
Text
Straight line
Numeric
Bar graph
3-1