Graphic Operation Terminal F940GOT
8.
Other Mode
This section describes the other mode in which convenient functions such as time switch,
printer output and operation environment are offered.
8.1
Outline of other mode
u u u u Basic operation
The SELECT MODE
screen is displayed.
Paragraph 2.3
[ OTHER MODE ]
[ OTHER MODE ]
SET TIME SWITCH
DATA TRANSFER
PRINT OUT
ENTRY CODE
SET UP MODE
OTHER MODE
Select "OTHER
MODE" on the screen.
• In the other mode, the following functions are
offered.
END
a)
a) SET TIME SWITCH
b)
Turns on the specified bit device during the speci-
c)
fied time.
d)
This function is valid when the screen creation soft-
e)
ware FX-PCS-DU/WIN-E is used.
b) DATA TRANSFER
Transfers user screens, the alarm history and the
sampling data between the screen creation soft-
ware.
c) PRINT OUT
Prints out the sampling data, the alarm history, etc.
d) ENTRY CODE
Registers an entry code to protect sequence pro-
grams in the PLC.
e) SET UP MODE
Allows to set the environment required to operate
the GOT such as the system language and the con-
nected PLC.
The OTHER MODE
screen is displayed.
The screen shown
below is displayed.
Other Mode 8
8-1