Write To Pc - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
14.2.3

Write to PC

Set word devices in the PC to which ASCII codes of the bar code reader are written from the
GOT.
- Set the word devices using the screen creation software.
SW¨D5C-GOTRE-PACK
- Set the word device in "Bar Code Reader" in "Common Setting".
FX-PCS-DU/WIN-E
To be supported in the near future.
• Specification of word devices
D, T, C, GD: FX Series
D, W, TN, CN, R, Z, V, GD: A Series
* When the FX Series PC is connected, C200 to C255 are not available.
• Number of devices (number of specified words)
One word stores two characters of the ASCII code data sent from the bar code reader.
Two to 32 word devices can be specified.
• Example of storage
The ASCII data from the bar code reader is stored in the word devices specified above. If
the read data is smaller than the specified number of devices, space (20H) is stored in
unused word devices.
Example:Data read from bar code reader: 1234567
On the contrary, if the read data is larger than the specified number of devices, the exces-
sive data is not stored.
Example:Data read from bar code reader: 1234567
To the specified head word device, the number of all read ASCII codes is stored without
regard to the specified number of devices.
Head device of write destination: D100
Write destination device
D100
D101
D102
D103
D104
D105
Head device of write destination: D100
Write destination device
D100
D101
Additional Functions (in Ver. 3.00 or Later) 14
When connecting a PC manufactured by another
company, specify word devices suitable to the PC.
Number of devices: 6
Stored data ASCII code
7
H3231 21
H3433 43
H3635 65
H2037 7
H2020
Number of devices: 2
Stored data ASCII code
7
H3231 21
á
"3" to "7" are
not stored.
Space (20H) is
stored after "7".
ß The number of all
ASCII codes including
excessive ASCII codes
is stored.
Refer to this, and
judge whether the data
is correctly written.
14-4