Attribute Of Display Element - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
9.4.4

Attribute of display element

The display elements shown in Paragraph 9.1.2 are equipped with detailed set items
(attributes).
Representative attributes are explained below.
Display position:
Specify the X and Y coordinates of the display position.
Because the mouse is used for the screen creation software, coordinates specified by the
mouse are registered.
Character size:
Half-width character: 8 × 16 dots
Full width character: 16 × 16 dots
1/4-width character: 8 × 8 dots
×0.5 to ×4 of full-width size in the lateral and longitudinal directions: Available only in alpha-
bets, numerics characters
1/4-width
8 dots
A
8 dots
Color specification:
Color: White, black, red, blue, yellow, green, purple and light blue
Black-and-white: Black and white
- FX-PCS-DU/WIN-E: Display color, background color, needle color and frame color
- SW¨D5C-GOTRE-PACK: Character color, plate color and frame color
Screen background color:
FX-PCS-DU/WIN-E: Eight colors or two colors (black and white) can be specified.
SW¨D5C-GOTRE-PACK: Only black can be specified.
Device specification (specification of devices in the PLC):
- Word device:
Timer (T), counter (C), data register (D) and index register (V and Z) In the A Series, link
register (W) and file register (R) are also available.
- Bit device:
Input (X), output (Y), auxiliary relay (M), state (S), timer (T) and counter (C)
In the A Series, F and B are also available.
Upper/lower limit:
Set the upper limit (maximum value) and the lower limit (minimum value) of displayed word
devices.
Word devices are displayed within the range determined by the upper and lower limits.
(in both lateral
H alf- F ull-
and longitudinal
width width
directions)
A
A A
×3
(in both lateral
×2
and longitudinal
directions)
A
Creation of Display Screens 9
×4
(in both lateral and
longitudinal directions)
A
9-13