Graphic Operation Terminal F940GOT
12.6
Data input function
The ON/OFF status of bit devices and the current value of word devices in the PLC can be dis-
played.
12.6.1
Numerical input function
The data of word devices in the PLC can be displayed in the form of numerics.
u u u u Contents of setting
1) Number of digits
• Maximum allowable number of digits: 12 (Each of "-" (minus sign) and a decimal point is
counted as one digit.)
High-speed counter
-2147483648
11 digits
Number of digits after decimal point
• Enter the number of digits after a decimal point for a case where a decimal point is dis-
played.
Example: When the displayed numeric is "2000"
2000: Number of digits after decimal point = 0
200.0: Number of digits after decimal point = 1
20.00: Number of digits after decimal point = 2
2.000: Number of digits after decimal point = 3
2) Style
• Select one style among decimal with sign, decimal without sign, hexadecimal, octal,
binary and real.
• Zero suppression
When the zero suppression function is not used, "0" is displayed in each digit position to
the left of the data. The number of "0"'s will depend on the specified total number of dig-
its.
Example:
When the total number of digits is set to 7 and the number of digits after decimal point is
set to 2
0012.34 ß "0" is displayed in these digits.
• A numeric is displayed horizontally.
Creation of Display Screen (SW¨ ¨ ¨ ¨ D5C-GOTRE-PACK) 12
If data whose number of digits exceeds the maximum allowable
C235 (32 bits)
number of digits is specified to be displayed, "?" is displayed.
to
-2147483648
10 digits
12-31