Screen Changeover From Plc; Screen Changeover Using Bit Devices - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
11.4

Screen changeover from PLC

From the PLC, the display screen can be changed over using bit devices and word devices
(data registers).
11.4.1

Screen changeover using bit devices

This paragraph describes the method to display a specified screen when a bit device (X, Y, M,
S, T or C) becomes ON or OFF.
Set item
Control Input
Bit Device
Screen No.
Do not enter any touch key.
Make "Bit Device" effective with a check mark, and enter a desired bit device (X, Y,
M, S, T or C).
In "Active when", select "On" (a contact) or "Off" (b contact).
Enter the screen No. of a screen to be displayed next among user screens (Nos. 0
to 499) and system screens (Nos. 1000 to 1030).
Changeover of Display Screen (FX-PCS-DU/WIN-E) 11
Description
11-9