Function List - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
1.2

Function list

The functions described in the previously are divided into six modes shown in the table below.
The operator can use each function by selecting a corresponding mode.
Mode
User
Screen
screen
mode
display
Function
Character display
§Characters such as text, numerics and external
characters are displayed.
§Japanese, English, Korean and Chinese (conti-
nental) are displayed.
Graphic display
§Graphic such as straight lines, circles rectangles
and bitmaps are displayed.
Monitor function
§Set values and current values of word devices (T,
C, D, V and Z) in the PLC can be displayed in the
form of numeric, bar graph, trend graph and
panel meter.
§The color of specified area on the screen is
inverted in accordance with the ON/OFF status
of bit devices (X, Y, M, S, T and C) in the PLC.
Data change function
§Set values and current values of word devices (T,
C, D, V and Z) in the PLC can be changed in the
form of numeric, bar graph, trend graph and
panel meter.
Switch function
§The ON/OFF status of bit devices (X, Y, M, S, T
and C) in the PLC can be controlled in the format
of momentary, alternate and set/reset.
Screen changeover
§The display screen can be changed over from
the PLC or a touch key.
Recipe function (data file transfer)
§Data saved in the GOT can be transferred to the
PLC.
Security function (screen protection function)
§Screens are displayed only when the entry code
is entered. (This function is available also in the
system screens.)
Outline of function
Introduction 1
Reference
Remarks
sections
3,9,10,12 Note 1
3,9,10,12
3,9,10,12
3,9,10,12
3,9,10,12
3,11,13
3,10,12
2
1-4