Toshiba Stratagy 4 Installation And Maintenance Manual page 70

STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL
SEPTEMBER 1994
PARAMETER
guest-defaults
DESCRIPTION
User ID to use for the default values when creating a new guest User ID. The field
values in the default guest User ID are copied into a guest User ID upon
initialization. Note:
n Not all fields are copied. Comment, Extension, and Directory Name fields are
initialized separately. If a Security Code is defined, it uses it as the default instead
of using the User ID as the default.
H All Notify and Auto-Schedule records are copied. Therefore, to initialize all new
guest User IDS with a minimum set of Notify and Auto-Schedule settings, first
define those settings in the "defaults box" 997 (unless you change the default Use
ID) before creating new User IDS. This is useful for setting standard, or default,
settings such as message light ON/OFF.
Operates the same way as the defaults-box option.
Possible values: valid User ID
Default: 996
guest-min
Starting User ID that may be used when creating a Guest User ID. When used in
conjunction with the guest-max option, they limit the number of Guest User IDS
that may be created.
Example: If this value is 90000 then the first guest User ID that is created will have
User ID 90000. The second guest will have User ID 90001, etc.
Possible values: valid User ID
Default: 90000
guest-max
Last User ID that may be used when creating a Guest User ID. When used in
conjunction with the guest-min option, they limit the number of Guest User IDS
that may be created.
Example: If this value is 90199, then the last guest User ID that may be created is
User ID 90199.
Possible values: valid User ID larger than the guest-min option setting
Default: 90199
hangup-supervision Whether the switch supports Loop Current Off/Drop for hang up supervision.
TRUE If your switch supports Loop Current Off/Drop for hang up supervision, this
option should be true. Even if your switch does not support this capability, it
usually has NO NEGATIVE EFFECT when set at true.
FALSE If you notice call transfer problems such as disconnects or three-way
conferencing, try setting this to false. If the problems are not solved by
setting this to false, set it back to true.
Possible values: true, false
Default: true
,
Table 5-l
Stratagy System Configuration
Options - Parameters and Definitions (continued)
5-9