Toshiba Stratagy 4 Installation And Maintenance Manual page 80

,
STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL
SEPTEMBER 1994
PARAMETER
fax-receive-reverse
DESCRIPTION
Setting depends solely on the Class 2 fax/modem used. Controls whether to
reverse the fax databits on receive.
TRUE Setting for most fax/modems.
FALSE Setting for some fax/modems. If the faxes received are reverse (mirror
fax-receive-speed
fax-requeue-interval
fax-reset
fax-send-reverse
images) from the original, try setting this option to FALSE.
Possible values: true, false
Default: true
Stratagy 24 only.
Maximum speed Stratagy allows for receiving faxes. Set this appropriately
depending upon the type and speed of your computer. Normally a value of 3
works for 386 CPUs at 33 MHz or higher. If you experience data loss on your
faxes, lower this setting.
': (empty string) as fast as possible
'0': 2400
'I': 4800
'3': 9600
Possible values: ", '0', 'I', '3'
The single quotes are required.
Default: '1'
Stratagy 24 only.
Number of minutes to wait between retries for fax-max-retries.
Possible values: 1 - 99 (minutes)
Default: 5
Stratagy 24 only.
Reset command to send to the fax/modem when DTR is dropped. Use W3'for
most fax/modems. Single quotes are required.
Default: '&D3'
Stratagy 24 only.
Setting depends solely on the Class 2 fax/modem used.
FALSE Setting for most fax/modems.
TRUE Setting for some fax/modems. If the faxes received are reverse (mirror
images) from the original, try setting this option to TRUE.
Possible values: true, false
Default: false
Stratagy 24 only.
Table 5-l
,
Stratagy System Configuration Options - Parameters and Definitions (continued)
5-19