Toshiba Stratagy 4 Installation And Maintenance Manual page 83

STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL
SEPTEMBER 1994
'
PARAMETER
did-dtmf
DESCRIPTION
How DID digits are passed to Stratagy.
TRUE: Stratagy expects the DID digits as DTMF.
FALSE: Stratagy expects the digits as loop pulse.
Possible values: true, false
did-mode
ring-mode
H-mode
Default: comment line (#set did-dtmf true)
Stratagy 6 and 24 only.
If this option is activated by removing the starting # character, it will define the
type of line connected to Stratagy.
TRUE: Stratagy assumed DID lines.
FALSE: Stratagy assumes a Tl line.
Possible values: true, false
Default: comment line (#set did-mode true)
Stratagy 6 and 24 only.
Method new calls are indicated when DID or Tl lines are connected to Stratagy
TRUE New calls are indicated by ring voltage.
FALSE: New calls are seen when loop current first comes on.
Possible values: true, false
Default: comment line (#set ring-mode true)
Stratagy 6 and 24 only.
Whether Stratagy should wait for a wink complete before processing the call.
TRUE: Wait.
FALSE: Do not wait.
Possible values: true, false
Default: comment line (#set tl-mod true)
Stratagy 6 and 24 only.
Table 5-l
Stratagy System Configuration Options - Parameters and Definitions (continued)
5-22