Toshiba Stratagy 4 Installation And Maintenance Manual page 69

STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL
SEPTEMBER 1994
PARAMETER
dtmf-gate
DESCRIPTION
Before dialing any User ID extension field Stratagy first verifies that DTMF was
entered since the call last accessed the User ID (usually 991) specified in the
DONE Chain of the initial User ID (usually 990). This "gate" prevents the transfer
of a dead/phantom call to the operator on those switches that do not have
disconnect supervision. Stratagy does not perform the "gate" action when the
Extension field begins with @.
TRUE Stratagy "gate's by requesting the caller to "Say yes at the tone" to
complete the chain and transfer.
FALSE: Do not have Stratagy complete the chain and transfer by requesting the
caller "Say yes at the tone."
Possible values: true, false
Default: true
dtmf-on
Length of the DTMF tones played by the system. In units of 10 ms.
Example: 20 is .2 set (200 ms).
Possible values: 10, 20, . . . . 90 (units of 10 ms)
Default: 20 (.2 set)
exit-digit Defines one (1) additional DTMF tone that will cause Stratagy to exit/stop during
recordings and present the Recording options.
Possible values: 0 - 9, *, # The single quotes are required.
Default: '#'
future-delivery
User ID to use to allow users to specify the time and/or date when a message will
be delivered for the future delivery feature. When the messages are awaiting
future delivery, they are stored in the User ID specified. Therefore, the User ID
cannot be used for any other purpose. The future delivery messages in this User
ID cannot be deleted or listened to. This User ID mailbox cannot be accessed by
a security code.
Possible values: valid User ID
Default: 995
gain-norm Starting volume of the ports.
Possible values: 8, -7, . . . . 0, . . . . 7, 8
Default: 0
\
/'
Table 5-1
Stratagy System Configuration Options - Parameters and Definitions (continued)
5-8