Toshiba Stratagy 4 Installation And Maintenance Manual page 66

STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994
PARAMETER
active-hold
DESCRIPTION
Controls how a caller must select to hold for a busy extension.
TRUE Caller must continue pressing * to hold for a busy extension, enter another
extension, or leave a message at the tone.
FALSE Caller selects * once to hold for a busy extension and the system allows the
caller to hold until he is either transferred, selects another extension, or
presses * again to leave a message.
Possible values: true, false
Default: false
adpcm-hq Sampling rate for outgoing greetings. The higher the sampling rate (kilo bits per
second), the better the sound quality, however, the amount of disk space used is also
higher.
IMPORTANT NOTE:
If you change this on an active system, all previously recorded greetings will
be lost.
Possible values: 32, 64
Recommended value: 64
Default: 64
adpcm-nq Sampling rate for incoming messages. The higher the sampling rate (kilo bits per
second), the better the sound quality, however, the amount of disk space used is also
higher.
IMPORTANT NOTE:
If you change this on an active system, all previously recorded messages will
be lost.
Possible values: 32, 64
Recommended value: 32
Default: 32
adpcm-pq
Sampling rate for the system prompt file. This is predetermined by the sampling rate
(kilo bits per second), at which the system prompt file was recorded.
IMPORTANT NOTE:
Do not change this parameter. All Stratagy system prompt files are recorded
at 32 bits per second sampling rate.
Default: 32
Table 5-l
Stratagy System Configuration Options - Parameters and Definitions
5-5