Toshiba Stratagy 4 Installation And Maintenance Manual page 79

STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL
SEPTEMBER 1994
,
PARAMETER
stopbitsl
stopbits
stopbits
stopbits
fax-dl-init
fax-flow-control
fax-id
fax-max-retries
DESCRIPTION
Number of stop bits to use for logical serial port 1.
Possible values: 0, 1, 2
Default: 1
Stratagy 6 and 24 only.
Number of stop bits to use for logical serial port 2.
Possible values: 0, 1, 2
Default: 1
Stratagy 6 and 24 only.
Number of stop bits to use for logical serial port 3.
Possible values: 0, 1, 2
Default: 1
Stratagy 6 and 24 only.
Number of stop bits to use for logical serial port 4.
Possible values: 0, 1, 2
Default: 1
Stratagy 6 and 24 only.
Dial codes Stratagy dials when a user dials 7 2 to send a fax message he has
received to a fax machine for pick up. Generally, this is the code for accessing a
public network line, i. e., "9".
Typical value: dial code to access an outside line. The single quotes are required.
Default: '9,' (dial 9 and pause for 2 set)
Stratagy 24 only.
Class 2 command to set the type of flow control for the fax/modem.
'& K3'
Zoom fax/modem
'IQ3 X3 &K3' Aceex fax/modem
'X3 &K3' Practical Peripherals fax/modem
Possible values: Include ' ', ' '.
The single quotes are required.
Default: '&K3'
Stratagy 24 only.
Fax/modem ID or telephone number used for identification to other fax devices.
Single quotes are required.
Default: ' ' (no identification)
Stratagy 24 only.
Maximum number of times, after the first, to retry sending a fax if it is
unsuccessful. Used only when sending the fax in two-call mode; i.e., the caller
enters a fax telephone number that the fax/modem calls and then sends the fax.
Possible values: 0 - 9 (retries)
Default: 1
Stratagy 24 only.
Table 5-1
Stratagy System Configuration Options - Parameters and Definitions (continued)
5-18