Toshiba Stratagy 4 Installation And Maintenance Manual page 217

STRATAGY
4/6/24 INSTALLATION AND MAINTENANCE MANUAL
SEPTEMBER 1994
In the example below, assume you want Stratagy
to
notify a user of the number of new messages in his
3.4.2 THE PROGRAMMING
mailbox.
Define the Notify record to contain:
Et/e: Pager - Number of Total and New
3.3.1 THE
ASSUMPTIONS
Messages
Assume the following:
Type: NORMAL
%>& ye+-/
User ID: 405
Method: 9W(4,T)%V,,W(2,P)-%U%M%
XNft-
"name and extension recording": Ken, Extension 405
,". .*,
Variable: <digital pager's phone number>
number of new messages in User ID mailbox 405: 3
The Method field breaks down as follows:
3.3.2 THE PROGRAMMING
&\i;
i 4
./ \ r
Define the Notify record to contain:
,-t 1
Tit/e: Voice - Number of Messages
.
Type: NORMAL
-. :
Method: %EW(3,V)P(U)P(M)
,.
The Method field breaks down as follows:
i
,I-
->
b
: _'
%E Dial the DTMF digits in the User
'
ID's Extension field. This should be
j c',
the user's phone number.
SC--
W(3,V) Wait up to 3 rings for a voice to
9, Dial 9 for an outside line. pn I, 57 ,,.
W(4,T) Wait up to 4 seconds to hear dial
tone.
%V
Dial the contents of the Notify
record's Variable field. This should
be the digital pager's phone
number.
,,-. I,
#I 3 i:
Pause 4 seconds (2 seconds + 2
i
" seconds)
P= FL >' % W(2,P)
Wait up to 2 rings for the
v pager/beeper to answer.
w - Pause .5 second to allow for the
pager's answer confirmation tones.
%U Relay the User ID.
+C Dial *. (Used by many paging
systems to designate a 'I-" in the
pager display.)
answer. -
P(U)
Play the "name and extension"
recording for the current User ID. If
there is no recording, say the User
ID digits.
P(M)
Play the total number of messages
and number of new messages for
the current User ID.
3.3.3 HOW IT WORKS
Per the notification schedule, Stratagy:
1.
Dials the user's phone number.
2.
Waits for a voice to answer.
3.
Says the user's recorded "name and extension":
"Ken, extension 405."
4. Says the user's number of new messages: "3."
3.4 NOTIFICATION TO A PAGER -
You can program Stratagy to notify a user via his digital
pager.
In the example below, assume you want Stratagy to
notify the user of the total number of messages and the
number of new messages in his User ID mailbox.
3.4.1 THE ASSUMPTIONS
Assume the following:
dial 9 for an outside line
the paging system uses the * to designate a I'-" in the
pager display
User ID: 405
total number of messages in User ID 405: 5
number of new messages in User ID 405: 3
%M Relay the total number of
messages in this User ID mailbox.
* Dial *. (Used by many paging
systems to designate a "-'I in the
pager display.)
%N
Relay the number of new
messages in this User ID mailbox.
# Dial #to end call.
- Pause .5 second.
L
3.4.3 HOW IT WORKS
Per the notification schedule, Stratagy:
1. Dials the user's digital pager's phone number.
2. When the pager answers:
n Relays the User ID.
n Relays the total number of messages.
H Relays the number of new messages.
,. ,l '
For this example, the following displays on the pager:
405-5-3.
,
3.5
RELAY PAGING TO A PAGER
With relay paging, the caller enters his number on the
telephone dial pad and Stratagy notifies the user by
relaying the caller's phone number to the user's pager