Toshiba Stratagy 4 Installation And Maintenance Manual page 78

STRATAGY 4/6/24
INSTALLATION AND MAINTENANCE MANUAL SEPTEMBER 1994
PARAMETER
serial-port1
DESCRIPTION
In order for Stratagy to communicate with peripheral devices connected to
COM/RS232 ports, it needs to know which ports are connected. There is a
mapping from the port that Stratagy knows to the physical port on the computer.
This mapping is defined by this option. To define serial port 1 as active, simply
define the COM port where it should be mapped.
serial-port2
Example: Set this option to 1 to connect serial port 1 (Stratagy) to COM port 1.
Possible values: 0 (not connected), 1 (COM port I), 2 (COM port 2), 3 (COM port
3), 4 (COM port 4)
Default: 0
Stratagy 6 and 24 only.
In order for Stratagy to communicate with peripheral devices connected to
COMRS232 ports, it needs to know which ports are connected. There is a
mapping from the port that Stratagy knows to the physical port on the computer.
This mapping is defined by this option. To define serial port 2 as active, simply
define the COM port where it should be mapped.
serial-port3
serial-port4
Example: Set this option to 2 to connect serial port 2 (Stratagy) to COM port 2.
Possible values: 0 (not connected), 1 (COM port I), 2 (COM port 2) 3 (COM port
3), 4 (COM port 4)
Default: 0
Stratagy 6 and 24 only.
In order for Stratagy to communicate with peripheral devices connected to
COM/RS232 ports, it needs to know which ports are connected. There is a
mapping from the port that Stratagy knows to the physical port on the computer.
This mapping is defined by this option. To define serial port 3 as active, simply
define the COM port where it should be mapped.
Example: Set this option to 3 to connect serial port 3 (Stratagy) to COM port 3.
Possible values: 0 (not connected), 1 (COM port I), 2 (COM port 2), 3 (COM port
3), 4 (COM port 4)
Default: 0
Stratagy 6 and 24 only.
In order for Stratagy to communicate with peripheral devices connected to
COM/RS232 ports, it needs to know which ports are connected. There is a
mapping from the port that Stratagy knows to the physical port on the computer.
This mapping is defined by this option. To define serial port 4 as active, simply
define the COM port where it should be mapped.
Example: Set this option to 4 to connect serial port 4 (Stratagy) to COM port 4.
Possible values: 0 (not connected), 1 (COM port l), 2 (COM port 2), 3 (COM port
3), 4 (COM port 4)
Default: 0
Stratagy 6 and 24 only.
Table 5-1
Stratagy System Configuration Options - Parameters and Definitions (continued)
5-l 7