Toshiba Stratagy 4 Installation And Maintenance Manual page 218

SEPTEMBER 1994
display. A caller can page without redialing, or even
knowing, the user's pager number.
3.5.1 THE ASSUMPTIONS
Assume the following:
dial 9 for an outside line
the paging system uses the * to designate a "-'I in the
pager display
User ID: 2765
caller's phone number: 583-3700
<
to activate relay paging, the caller presses # when
the User ID's greeting plays
3.5.2 THE PROGRAMMING
Define the Notify record to contain:
Title: Relay Page
Type: RELAY
nllethod: 9W(4,T)%V,,W(2,P)-%U%R#-
Variable: cdigital'pager's phone number>
The Method field breaks down as follows:
9 Dial 9 for an outside line.
W(4,T) Wait up to 4 seconds to hear dial
tone.
%V Dial the contents of the Notify
record's Variable field. This should
;;;heeFgital pager's phone
,, Pause 4 seconds (2 seconds + 2
seconds)
W(2,P) Wait up to 2 rings for the
pager/beeper to answer.
- Pause 5 second to allow for the
pager's answer confirmation tones.
%U Relay the User ID.
or Dial *. (Used by many paging
systems to designate a I'-" in the
pager display.)
-
%R
Relay the DTMF digits entered by
the caller. This should be the
caller's phone number.
# Dial # to end call.
- Pause .5 second.
3.5.3 HOW IT WORKS
Per the notification schedule, Stratagy:
1. Dials the user's digital pager's phone number.
2. When the pager answers:
n Relays the User ID.
n Relays the caller's phone number.
For this example, the following displays on the -pager:
%'
2765-5833700.
3.6 EWRGENCY LISTS
In an emergency list, Stratagy notifies one person of a
new message first, then after a time interval notifies a
second person if the first person has not picked up the
message, and after another time interval notifies a third
person if the message has not been picked up, and so
on.
When creating an emergency list, carefully define the
initial time to wait before starting the notification and the
repeat time.
3.6.1 THE ASSUMPTIONS
Assume that you want to create three Notify records for
one User ID. Each record contains a different phone
number to call; one for each of the three people who will
potentially be notified.
3.6.2 THE PROGRAMMING
Define the first Notify record to contain:
Notify After: 0
Continue Every: 5
Max Times: 0
Define the second Notify record to contain:
Notify After: 15
Continue Every: 5
Max Times: 0
Define the third Notify record to contain:
Notify After: 30
Continue Every: 5
Max Times: 0
3.6.3 HOW IT WORKS
When the emergency occurs:
1. The first Notify record starts notification
immediately.
2. If the message is not picked up, the first Notify
record continues notification every 5 minutes.
3. After 15 minutes, if the message is not picked up,
the second Notify record starts notification every 5
minutes in conjunction with the first Notify record.
4. After 30 minutes, if the message is not picked up,
the third Notify record starts notification every 5
minutes in conjunction with the first and second
Notify records.
5. All three Notify records continue every 5 minutes
until the message is picked up.