seconds and then press the button again to select between
the alternating displays (km/h and m/h). The wheel circum-
ference can be calculated on the basis of the tyre size and
can be set in the same way as the clock.
Example for a tyre size of 14 inches:
Conversion from
14" x 25.4 = 355.6 mm
inches to cm
C = d x p
355.6 mm x 3.1416 = 1 117 mm
(wheel circumference to be set)
7.8.3 Push Button Module
CAUTION
Risk of accidents due to uncontrolled driving character-
istics. The push button module is an option for the use of
the enAble50 system. Improper adaptation of the push
button module to a power wheelchair with components
outside the Otto Bock modular system or subsequent
modifications by the user are not permitted.
The push button module lets the user select additional elec-
trical functions directly during normal driving operation.
B600
Available functions
Depending on the power wheelchair model and the pro-
gramming of the push button module, up to 5 electric func-
tions can be controlled during normal driving operation
(Figure 43, item 1). Examples include:
n Seat tilt
n Electric back angle adjustment
n Lift seat function
n Right / left footrest; combination of both footrests
n Special functions (combinations) => symbols S1 – S5
The symbols used on the push button module correspond to
the symbols used on the LCD monitor (see 7.8.1 "Separate
LCD Monitor with Infrared).
Push button functions
The "M" button (= mode, Figure 43, item 2) is used to
advance the individual functions (1-2-3-4-5-1-2-...).
The blue LED (Figure 43, item 3) indicates the selected
function.
02/2010
Accessories
Page 155