Otto Bock B400 Instructions For Use Manual

Otto Bock B400 Instructions For Use Manual

Hide thumbs Also See for B400:

Advertisement

B400
Instructions for Use (Qualified Personnel)

Advertisement

Table of Contents
loading

Summary of Contents for Otto Bock B400

  • Page 1 B400 Instructions for Use (Qualified Personnel)
  • Page 3 10.1 Liability ............Preparation for Use ..........Tools required ..........10.2 CE Conformity ..........Initial operation ..........10.3 Warranty Terms and Conditions ......5.2.1 Installing the fuse ..........10.4 Trademarks ............ 5.2.2 Charging the battery ........B400 Ottobock | 3...
  • Page 4 Table of contents Appendices ............11.1 Technical data ..........4 | Ottobock B400...
  • Page 5: Foreword 5

    (user). The operational safety of the wheelchair can only be ensured These instructions for use must be given to the user. if it is used properly in accordance with the information con­ B400 Ottobock | 5...
  • Page 6 Living conditions/environment ► Observe all safety instructions in these instructions for 2.3 Contraindications use and in all other applicable documents. Due to the given seat dimensions, this wheelchair type can­ not be used to fit children. 6 | Ottobock B400...
  • Page 7 Pinching, crushing or damaging the product Exposed pinch points ► When working, use only tools that are suitable for the Risk of pinching, crushing of limbs conditions at the workplace and whose proper use ensures safety and health protection. B400 Ottobock | 7...
  • Page 8 Ensure 3.4 Programming safety instructions ergonomically correct lifting of these parts. Use suffi­ WARNING ciently large hoisting devices or perform this work with a helper. Incorrect configuration settings Falling, tipping over, collision due to programming errors 8 | Ottobock B400...
  • Page 9 3.5 Further Information INFORMATION The serial number required for further inquiries and orders is found on the nameplate (see section "Nameplate"). B400 Ottobock | 9...
  • Page 10: Name Plate

    Maximum gross weight The name plate is located on the side of the frame Manufacturer information/address below the seat. CE marking – product safety according to EU guidelines See the instructions for use (user) for additional warning labels 10 | Ottobock B400...
  • Page 11 ► Remove the fuse if the wheelchair is not used for more marks where they come into contact with the ground. than 3 days. Therefore the manufacturer recommends grey tyres if the product is primarily used indoors. INFORMATION To remove the fuse: see Page 13. B400 Ottobock | 11...
  • Page 12: Preparation For Use

    Risk of injury due to fire or explosion, battery damage, Before initial operation of the power wheelchair, the 80-A short circuit safety fuse must be installed in the corresponding fuse hold­ er under the seat next to the controller. 12 | Ottobock B400...
  • Page 13: Adjustments

    5.2.2 Charging the battery made in the user's presence. See the power wheelchair instructions for use (user) for all All parts of the product should be cleaned thoroughly before information regarding the charging process. adjustments are made. B400 Ottobock | 13...
  • Page 14: Basic Settings

    • Are all options installed according to the order form? an accident. 14 | Ottobock B400...
  • Page 15: Transport To The Customer

    7.2.1 Reducing the transportation size ► The power wheelchair must be secured in accordance The instructions for use (user) contain information on redu­ with the regulations for the transport device. cing the transportation size. B400 Ottobock | 15...
  • Page 16: Preparing For Transport

    Fig. 2 Eyebolts The manufacturer recommends regular maintenance of the product every 12 months. 1 Eyebolt, front The instructions for use (user) contain further information on 2 Eyebolt, rear cleaning/disinfection as well as maintenance/repair by the user. 16 | Ottobock B400...
  • Page 17: Disposal

    ► Replace the seat upholstery if the wheelchair is to be re-used. 10.1 Liability The product is suitable for re-use. The manufacturer’s warranty applies only if the device has been used under the conditions and for the purpose B400 Ottobock | 17...
  • Page 18: Ce Conformity

    All denotations within this accompanying document are sub­ ject to the provisions of the respective applicable trademark laws and the rights of the respective owners, with no restric­ tions. All brands, trade names or company names may be 18 | Ottobock B400...
  • Page 19: Technical Data

    Armrest length (standard) 260 mm Back height (standard seat) 450 mm or 550 mm (depending on the version) Back angle -9/1/11/21° or 0/10/20/30° Overall width 580 mm Overall height 1030 mm Total length 1080 mm Weight when empty (basic equipment) 95 kg B400 Ottobock | 19...
  • Page 20 * The specified weights vary according to the selected options and model. *** = 3-point turn by 180° Electrical system IP protection rating (according to DIN EN IP44 60529) Operating voltage 24 V Batteries AGM (Standard) 2 x 12 V, 50 Ah (C5) Gel (Option) 2 x 12 V, 63 Ah (C5) 20 | Ottobock B400...
  • Page 21 Wheel combination 14"/9" (Standard): 60 mm; with curb climbing assist: 100 mm Wheel combination 12.5"/8" (Option): 45 mm Range (on level surfaces)** approx. 35 km - for battery with 50 Ah (C5) approx. 45 km - for batteries with 63 Ah (C5) B400 Ottobock | 21...
  • Page 22 *** The braking distance can be longer accordingly due to the user weight, installed options and condition of the tyres, as well as due to weather conditions and the surface. Corrosion protection Corrosion protection Powder-coated frame 22 | Ottobock B400...
  • Page 23 Africa Otto Bock HealthCare Otto Bock Algérie E.U.R.L. Otto Bock France SNC Otto Bock Polska Sp. z o. o. Otto Bock de Mexico S.A. de C.V. Otto Bock Korea HealthCare Inc. Deutschland GmbH 91978 Courtaboeuf Cedex 61-029 Poznań · Poland Mackle-Ben Aknoun · Alger C.P.
  • Page 24 Ihr Fachhändler | Your specialist dealer Versandanschrift für Rücksendungen/Adress for Returns: Otto Bock Manufacturing Königsee GmbH Lindenstraße 13 · 07426 Königsee-Rottenbach/Germany Otto Bock Mobility Solutions GmbH Lindenstraße 13 · 07426 Königsee-Rottenbach/Germany T +49 (0) 69 9999 9393 · F +49 (0) 69 9999 9392 ccc@ottobock.com ·...

Table of Contents