Controlling Additional Electrical Functions - Otto Bock B600 Instructions For Use Manual

If the battery symbol and all the segments are flashing, this
means that the battery is over voltage. Since this will lead to
battery damage, a warning symbol also appears.
The charging process is indicated by the battery segments
lighting up one after the other. When the battery is charging,
the driving function is locked out (see Section 6.5.1, Charg-
ing).
Display symbol(s)
Table. 2 Battery indicator on the control panel
B600
Information
Driving menu with speed level
and full battery capacity
Low battery capacity
Charging process with drive
function lock
Battery is under voltage, with
warning symbol
Battery is over voltage, with
warning symbol
6.3.6 Controlling Additional Electrical Functions
INFORMATION
For more information on additional electrical functions,
please see Section 8.1 through 8.3.
Additional electrical functions are accessed by pressing the
"M" button (approximately 2 seconds). Moving the joystick
to the right lets you switch between the different functions.
The function that is currently selected is shown on the LCD
monitor.
The respective function can be extended or retracted by
moving the joystick ahead or back. The electric motor moves
the respective function as long as the joystick is deflected,
and stops at the end positions.
Electric back angle adjustment: When the joystick is de-
flected ahead or back, the back rest moves ahead or back
accordingly.
Electric seat tilt: Deflecting the joystick to the rear will elec-
trically tilt the seat to the rear. Deflecting the joystick to the
front tilts the seat ahead until it is level (factory setting; can
be adapted by the specialist dealer).
02/2010
Operation
Page 129