Figure 11 Footrest Lock - Otto Bock B600 Instructions For Use Manual

Operation
Mounting and Removing the Control Panel
The standard configuration has the control panel mounted
on the right side. If required, it is also possible to mount the
control panel on the left side. This change may only be made
by a specialist dealer.
6.1.5 Footrest
CAUTION
Risk of pinching. Ensure fingers are not in the danger
area when flipping the footplates up or down. Complete
removal of the footrest from the adapter is only permitted
for transportation of the wheelchair.
Removal
1. Remove the calf band.
2. Flip the footplate up, release the footrest lock (see Fig-
ure 11), and swing the footrest either to the inside or
outside.
3. Pull the footrest up to remove it.
Page 120
Reassembly
1. Reinsert the footrest from above by placing it in the
adapter and swinging it forward until the footrest lock
engages.
2. Reattach the calf band to the adapter.
Figure 11 Footrest lock
Adjusting the Lower Leg Length (see Figure 12)
By loosening the set screw, the footplate can be adapted to
your lower leg length and to the thickness of your seat cush-
ion.
02/2010 B600