Figure 34 Illustration Of Pressure Points - Otto Bock B600 Instructions For Use Manual

With the Recaro® LT back rest, the lateral guide in the lum-
bar section can be individually adjusted by turning the hand
wheel. Turning the wheel to the front evenly moves the two
lateral guides closer to each other. Turning the wheel to the
rear adjusts the two lateral guides away from each other.
Seat
The type X and W seats have an extendable pad at the
front. The lever used to adjust this pad is located below the
seat. Pull the lever up to shift the pad into the desired posi-
tion. The pad locks into place as soon as the adjustment le-
ver is released. The adjustment lever must audibly lock in
place and return to its initial position.
Headrest
The headrest is adjustable in both height and angle.
A second person is needed to remove the headrest. The
pressure points must be detected under the cover by feel
and pressed simultaneously (Figure 34). Now the second
person can pull the headrest up and out.
B600
Figure 34 Illustration of pressure points
Removing the Recaro® Seat from the Chassis
n Pull ahead on the release strap beneath the front part of
the seat.
n Loosen the right and left bolts that lock the seat to the
frame.
n To release the posterior seat adapter from the retainer
bushings, slightly tilt the seat to the rear and slide it
back a little.
n Remove the Recaro® seat.
02/2010
Accessories
10
10
180
Page 147