Push-Button Module - Otto Bock C1000 SF Instructions For Use Manual

Use
[Mode] LED indicator
INFORMATION
► The following information on LED function only applies when the attendant control is used as an individual
input device.
► If the control panel/attendant control are used in combination, the selected speed level and errors are
indicated by the display symbols on the LCD screen (see the section "Button and display functions" and
"Wheelchair control unit fault overview").
The LED has 3 colour and various flash codes to indicate the statuses of the speed level and system faults:
LED
Green is lit
Orange is lit
Red is flashing
Off
[Selected power seat function] LED indicator
INFORMATION
► The following information on LED function only applies when the attendant control is used as an individual
input device.
► When the control panel/attendant control are used in combination, the chosen seat function is indicated
by the display symbols on the LCD screen (see the section "Power seat functions" > "Joystick and display
functions").
The power seat functions are accessed by depressing of the "M" button for approx. 2 seconds.
The currently selected seat function is indicated by the following LEDs:
Display
Moving the joystick to the right switches between the different seat functions. The respective function can be exten­
ded or retracted by moving the joystick forward or back.
The corresponding LEDs flash if an error occurs (see Page 61).

6.14.4 Push-button module

WARNING
Risk of uncontrolled driving behaviour
Falling, tipping, collision with persons or nearby objects
► Note that no changes of any kind may be made to the push-button module by the user.
► Programming of the push-button module may only be performed by trained, qualified personnel.
Power wheelchairs with enAble50 control units can be equipped with optional push-button modules.
The push-button module lets the user select additional power seat functions directly during normal driving opera­
tion.
48
Information
Speed level 1
Speed level 2
Fault (see Page 61)
LED indicator switched to seat function
Information
Power back angle adjustment
Power seat tilt
Power seat height adjustment
Coupled power seat adjustment (backrest and seat tilt)
C1000 SF