Figure 21 Brake Release; Figure 22 Activating The Brake - Otto Bock B600 Instructions For Use Manual

Operation
Figure 21 Brake release
1 Brake release bolt
Now the brake release lever has been released and can be
pushed ahead to the stop. In this position, the control unit
will recognise that the brake has been released and auto-
matically deactivate the driving function. As soon as the
joystick is deflected, a warning will appear on the LCD
monitor.
Once the brake release lever has been released,
INFORMATION
all braking systems are deactivated.
Page 134
2 Brake release lever
Activating the brake
To activate the brake, push the brake release lever up until
the brake release bolt engages (see Figure 22). To reacti-
vate the driving function, switch the wheelchair control unit
off and then back on.
Figure 22 Activating the brake
02/2010 B600