pull. To reduce the length of the belt, pull the overhanging
belt end.
7.9.3 Adapter for Headrest Mounting Kit
(Standard Seat)
The power wheelchair can be equipped with an optional
headrest. An adapter for attachment of the headrest mount-
ing kit is available for this purpose.
Figure 45 Adapter for headrest mounting kit
7.9.4 Attendant Control
A separate control panel can be attached to the back rest
of the power wheelchair for use by an attendant.
B600
7.9.5 Additional Options
n Curb climbing assist: The curb climbing assist is used
to clear curbs and steps that have a maximum height of
10 cm.
n Puncture resistant tyres: Solid rubber tyres
n Contour seats in various sizes for improved comfort and
additional adjustment options
n Seating shell interface: For the adaptation of special
seating shells. Control panel holders for seating shells
are also available.
n Arm rest accessories: Special adapter for arm rests
from our accessory catalogue
n Attendant control: External joystick on the back rest
n Joystick accessories: Fork for tetraplegics, STICK S80,
soft ball, golf ball, and flexible control stick shaft
n Protective bow for control panel: Metal bow to protect
the control panel against impacts
n Crutch holder
n Folding rear view mirror
n Tray: Attachable table tray
n Accessories case, backpack, pocket for mobile phone
02/2010
Accessories
Page 159