Push-Button Module; Special Controls; Delivery; Final Inspection - Otto Bock C1000 SF Instructions For Use Manual

Delivery

6.12.3 Push-button module

The power wheelchair can be ordered and equipped with a push-button module. The installation position of the
push-button module may have to be adjusted so that the user can reach it easily.
The instructions for use (user) contain information on operating the push-button module.

6.12.4 Special controls

The power wheelchair can be ordered and equipped with special controls.
When special controls are installed, the control functions are not carried out using the standard joystick on the
control panel but using modular components (such as sip and puff control, chin control, mini/midi joystick control).
Special controls which are already pre-programmed may have to be adapted to the user's specific requirements.
Information on fitting the special controls to the user, programming and operation is contained in further Ottobock
documents (e.g. 647G1242; 647G1243).
7 Delivery

7.1 Final inspection

A final inspection must be performed before delivery of the power wheelchair:
• Are all options installed according to the order form?
• Was the product fitted optimally to the physical and mental condition of the user (seat, armrests, footplate, con­
trol panel, additional controls)?
• Are the batteries charged?
• Is the tyre pressure correct (see tyre sidewall and the section "Technical data" for information)?
• Do all manual and power functions work properly?
• When the seat retaining straps are inserted, are the stand-up function and the "tilt" function (if installed)
blocked?
• Do all control functions work properly?
• Do the brakes work?
• If intended: Are all options required to take part in road traffic installed and fully functional (e.g. warning tri­
angle, lights, warning flashers)?

7.2 Transport to the customer

CAUTION
Securing the power wheelchair insufficiently during transport
Crushing, pinching of body parts due to failure to observe transportation instructions
► During transportation in vehicles or aircraft, on lifting platforms or in lifts, turn the control unit of the power
wheelchair off and lock the brake.
► The power wheelchair must be secured in accordance with the regulations for the transport device.
► During transport in a vehicle, the power wheelchair must be secured sufficiently with cargo straps. Only
attach the cargo straps to the corresponding transportation eyelets and specified tie-down points.
NOTICE
Improper transport
Damage to the product due to failure to observe transportation instructions
► Ensure that the seat is lowered all the way and the backrest is in a vertical position prior to loading and for
transporting the power wheelchair.
► Only use sufficiently large hoisting devices to transport the power wheelchair (see section "Technical data"
for the weight of the power wheelchair).
NOTICE
Use of unsuitable packaging
Damage to the product caused by transportation using incorrect packaging
► Use only the original packaging for delivery of the product.

7.2.1 Reducing the transportation size

The instructions for use (user) contain information on reducing the transportation size.
16 C1000 SF