Initial Operation; Figure 3 Anti-Tipper B600; Figure 4 Fuse Holder - Otto Bock B600 Instructions For Use Manual

Delivery and Preparation for Use
Figure 3 Anti-tipper B600
4.2 Initial Operation
WARNING
Risk of suffocation. Packaging materials must be kept
out of reach of children.
All components must be checked for completeness and
functionality (see Figure 2) prior to initial operation. Before
the power wheelchair can be switched on, the 80 A fuse
must be inserted into the fuse holder at the rear of the bat-
tery case (see Figure 4).
Page 114
To do so, remove the fuse from the protective cover on the
control panel, open the cover of the fuse holder, and insert
the fuse.
Make sure that the fuse is pressed into the centre of the
spring contacts and that it is not positioned at an angle.
Close the cap until you feel it snap back into place.
Figure 4 Fuse holder
1 Cover open
2 Fuse inserted
3 Fuse holder
02/2010 B600