Otto Bock B500 Classic User Instructions
  1. Manuals
  2. Brands
  3. Otto Bock Manuals
  4. Wheelchair
  5. B500 advanced
  6. User instructions

Otto Bock B500 Classic User Instructions

Hide thumbs Also See for B500 Classic:
Table of Contents

Advertisement

Quick Links

See also: Instructions for Use Manual , Using Manual
B500 classic/advanced
Instructions for Use (User)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B500 Classic and is the answer not in the manual?

Questions and answers

Related Manuals for Otto Bock B500 Classic

Summary of Contents for Otto Bock B500 Classic

  • Page 1 B500 classic/advanced Instructions for Use (User)
  • Page 2 Additional options for the B500 advanced The model B500 advanced power wheelchair can be equipped with the following additional options (applicable options are checked): Electronic drive-away lock* [ ] Function enabled [ ] Function disabled If enabled, the function is activated by pressing the mode button on the control panel. The function is deactivated with the joystick.

  • Page 3: Table Of Contents

    Delivery ..............Footrests ............Scope of supply ..........Getting in / transfer .......... Options ............Control unit ............ 4.2.1 Model B500 classic ......... 6.4.1 Control Panel ..........4.2.2 Model B500 advanced ........6.4.2 Buttons and display functions ......Storage ............
  • Page 4 Safety Instructions ........... 6.9.3 Manual back angle adjustment ......6.14.2 Permitted use ..........6.9.4 Manual elevating footrests ........ 6.14.3 Restrictions for Use ......... 6.10 Additional seat options ........6.14.4 Necessary accessories ........6.10.1 Contour seat ........... 4 | Ottobock B500 classic/advanced...
  • Page 5 7.4.2 Wheelchair control unit fault overview ....7.4.3 Attendant control fault overview ......Disposal ............... Safety Instructions ........... Disposal Information ........Legal Information ..........Service life ............Liability ............CE Conformity ..........Warranty terms ..........B500 classic/advanced Ottobock | 5...
  • Page 6 Please note also the information in the chapter "Liabil­ outdoors. ity". Be sure to read these instructions for use before you start using the wheelchair. In particular, please observe the information in the chapters "Safety" and "Use". 6 | Ottobock B500 classic/advanced...

  • Page 7: Product Overview

    1 Backrest 6 Caster wheel 2 Rear LED lights 7 Footplates 3 Drive wheel 8 Seat cushion 4 Motor with brake release 9 Side panel (here: with front lights) 5 Anti-tipper 10 Control panel B500 classic/advanced Ottobock | 7...
  • Page 8 ► The product may not be used in road traffic by users ► Keep away from any sources of fire, especially burning who have any mental limitations which can temporarily cigarettes. or permanently limit attentiveness and judgement. 8 | Ottobock B500 classic/advanced...
  • Page 9 3.3 Reference to additional safety instructions Observe additional safety instructions in the following chapters: • Chapter "Preparation for Use" • Chapter "Usage" > "Driving Functions" • Chapter "Usage" > "Batteries/Charging Process" • Chapter "Usage" > "Power Seat Functions" B500 classic/advanced Ottobock | 9...

  • Page 10: Name Plate

    Allowable axle load, front Allowable axle load, rear Maximum gross weight The name plate is located on the side of the frame below the seat. Manufacturer information/address CE marking – product safety according to EU guidelines 10 | Ottobock B500 classic/advanced...
  • Page 11 Safety 3.4.2 Warning labels Label Meaning Electric driving mode: lock motor brake Manual driving mode: unlock motor brake Risk of pinching. Do not reach into the danger area. B500 classic/advanced Ottobock | 11...
  • Page 12 The power wheelchair should always be protected against 4.2.1 Model B500 classic external influences. The B500 classic power wheelchair can be equipped with The control unit must be turned off. up to 2 of the following power seat options: 4.3.2 In case of extended disuse •...

  • Page 13: Preparation For Use

    ► In case of problems with the settings (control panel on. Therefore a suitable underlay should be used if the problems etc.), please contact the qualified personnel product is parked for extended periods of time. who fitted your product. B500 classic/advanced Ottobock | 13...

  • Page 14: Initial Operation

    ► Any time you loosen a screw connection with thread lock, replace it with a new screw connection or secure the old screw connection with medium strength thread ® locker (e.g. Loctite 241 14 | Ottobock B500 classic/advanced...

  • Page 15: Adjustments

    2 Lock with lever 1) Pull on the strap until the locking bolts are free. 2) Change the backrest angle to the desired position. 3) Release the strap. The locking bolts engage at the desired position. B500 classic/advanced Ottobock | 15...

  • Page 16: Adjusting The Side Panels

    20° while driving. 2 Back angle adjustment knob INFORMATION 5.3.3 Adjusting the side panels For further Recaro® seat settings: see the chapter INFORMATION "Recaro® seat". To remove and install the side panels: see Page 19. 16 | Ottobock B500 classic/advanced...

  • Page 17: Adjusting The Footrests

    2) Adjusting the armrest: Adjusting the lower leg length → Version 1:Push the armrest along the slotted holes to the front or back into the desired position ((see CAUTION Fig. 6), left). Exposed pinch points Pinching, crushing of fingers B500 classic/advanced Ottobock | 17...

  • Page 18: Adjusting The Belt Lengths

    3) Tighten the 3 set screws on the bottom of the armrest. Fig. 7 Adjusting the lower leg length (standard footrest) 5.3.5 Adjusting the belt lengths To adjust the belt lengths: see Page 59. 18 | Ottobock B500 classic/advanced...

  • Page 19: Changing Control Unit Parameters

    The control panel mounting side may only be changed by authorised personnel. 6.1 Side panels 5.3.7 Changing control unit parameters INFORMATION WARNING For additional information on side panels with lighting: see Page 58. Incorrect configuration settings Falling, tipping over, collision due to programming errors B500 classic/advanced Ottobock | 19...

  • Page 20: Footrests

    1) Unhook the calf band. 2) Flip the footplate up. 3) Release the footrest lock (see Fig. 10). 4) Flip the footrest out or in. 5) Pull the footrest up and remove it. Fig. 9 Side panel wing screw 20 | Ottobock B500 classic/advanced...

  • Page 21: Getting In / Transfer

    3) Have an attendant assist you or use a transfer lifter to ► Turn the control unit off while getting in and out, in get into and out of the power wheelchair. order to avoid accidental driving. B500 classic/advanced Ottobock | 21...
  • Page 22 4) Remove the footrest if necessary (see Fig. 10). 5) Slide onto the seat from the side. INFORMATION: A ramp makes it easier to get into and out of the wheelchair from the side. 6) Install the side panel (see Page 19). 22 | Ottobock B500 classic/advanced...

  • Page 23: Control Unit

    The control panel is used to switch the power wheelchair on and off, enter driving commands and display the current statuses of certain functions and components. B500 classic/advanced Ottobock | 23...

  • Page 24: Buttons And Display Functions

    Holding this button turns the power wheelchair on or off and level, the remaining battery capacity, the status of power activates/deactivates the drive-away lock. options as well as warnings and errors. All display symbols are displayed while the power wheelchair turns on. 24 | Ottobock B500 classic/advanced...
  • Page 25 After turning the control panel on, the LCD display indicates • As the remaining battery capacity decreases, the LCD the selected speed level and battery capacity in the Driving segments turn off one by one. menu: B500 classic/advanced Ottobock | 25...

  • Page 26: Driving Functions

    Risk of collision with persons nearby objects Battery undervoltage with warning ► Note the lack of brake functionality when the brake is symbol deactivated. The brake function may only be released in the presence of an attendant. 26 | Ottobock B500 classic/advanced...
  • Page 27 (e.g., department store EAS systems) or cause interference with such devices. If this occurs, move your product outside the interference range. B500 classic/advanced Ottobock | 27...

  • Page 28: Driving Notes

    Therefore the speed must always be adjusted to ation) since this causes the tyres to age quickly. The the ground conditions. manufacturer recommends replacing the tyres every 2 years regardless of the amount of wear. 28 | Ottobock B500 classic/advanced...

  • Page 29: Switching On And Off

    The speed must be reduced in dangerous areas (e.g. select Risk of falling, tipping, collision with persons or nearby speed level 1). objects ► Before every use, ensure that the product and its safety functions are in safe and proper condition. B500 classic/advanced Ottobock | 29...

  • Page 30: Selecting The Speed Levels

    The power wheelchair has a programmable number of them at one go. speed levels (delivery condition = 5 speed levels). • The speed level is increased by briefly pressing the [Mode] button (see Fig. 13, item 4). 30 | Ottobock B500 classic/advanced...

  • Page 31: Range

    The control unit of the product switches to a safe mode at elevated temperatures and after driving uphill for extended The following factors influence the range of a power wheel­ periods of time, limiting the performance of the product. chair: • Battery capacity B500 classic/advanced Ottobock | 31...

  • Page 32: Drive-Away Lock

    "Function disabled" at the factory. → A long beep confirms that the driving function is If this setting needs to be changed, this is done by the enabled. authorised person who fitted the wheelchair. 32 | Ottobock B500 classic/advanced...

  • Page 33: Steering Lock

    If the steering lock is activated, the caster wheels or the 3) Move the joystick. The power wheelchair now drives in drive wheels (depending on the type) are set straight ahead. the chosen direction without the steering lock. B500 classic/advanced Ottobock | 33...

  • Page 34: Adjusting The Driving Characteristics

    Incorrect settings can lead to a loss of braking turer. power. It is possible to push the power wheelchair in case of con­ trol unit failure or insufficient battery capacity. To do so, it is 34 | Ottobock B500 classic/advanced...
  • Page 35 1) Push the brake release lever (see Fig. 17, arrow) up until the brake release bolts engage. Display Information 2) Turn the control unit off and on again. Brake is disabled → The driving function is activated. B500 classic/advanced Ottobock | 35...

  • Page 36: Batteries/Charging Process

    Moreover the battery capacity displayed on the at the factory matches the batteries included in the control panel can differ more significantly from the actual scope of delivery and may not be altered independ­ battery capacity. ently. 36 | Ottobock B500 classic/advanced...

  • Page 37: Battery Charger

    ► Only clean the battery charger with a dry cloth. ging current to be fed into the battery. The battery charger is designed for maintenance-free and low-maintenance batteries. B500 classic/advanced Ottobock | 37...

  • Page 38: Charging The Battery

    ► Switch the battery charger off and disconnect the 3) Connect the battery charger to the mains socket and mains plug before you disconnect the battery. turn it on. 38 | Ottobock B500 classic/advanced...

  • Page 39: Power Seat Functions

    Falling, tipping over due to user error ► Drive in street traffic only with the seat tilt and seat height adjustments lowered and with a vertical back­ Fig. 18 Charging/programming receptacle on the control pan­ rest. B500 classic/advanced Ottobock | 39...
  • Page 40 ► Note that the maximum permitted load of the power wheelchair may be reduced when using the options NOTICE "Electric seat height adjustment" and "Electric seat tilt" Improper use of power seat options (see section "Technical Data"). Risk of damage to the product 40 | Ottobock B500 classic/advanced...

  • Page 41: Power Seat Height Adjustment

    (lap belt, four-point belt) and do INFORMATION not lean out beyond the seat surface. ► Please also observe the safety instructions in the sec­ tion "Power Seat Functions" > "Safety Instructions for Use". B500 classic/advanced Ottobock | 41...

  • Page 42: Power Seat Tilt

    This is indicated on the control panel by the snail The power wheelchair can be equipped with a power seat symbol on the LCD display: tilt function. For more information on the specific equipment of this power wheelchair, contact the qualified personnel. 42 | Ottobock B500 classic/advanced...

  • Page 43: Power Back Angle Adjustment

    ► When driving with the back angle adjustment activ­ available in 3 different versions: ated, fasten the belts (lap belt, four-point belt) and do Power seat tilt up to 20° (B500 classic only) • not lean out beyond the seat surface.

  • Page 44: Power Footrests

    To avoid constant pressure or to ensure anti-shock support, the power wheelchair can be equipped with power adjustable footrests. The footrests can be activated individu­ ally or at the same time, depending on the configuration. 44 | Ottobock B500 classic/advanced...

  • Page 45: Controlling Power Seat Functions

    Once a seat function is selected, it is activated by mov­ ing the joystick forward or backward. • The electric motor moves the seat function as long as the joystick is deflected, and stops at the end positions. B500 classic/advanced Ottobock | 45...

  • Page 46: Joystick And Display Functions

    Forward: Right footrest moves forward Back: Right footrest moves back Power footrests, coupled Forward: Both footrests move forward Back: Both footrests move back * Deflection direction can be modified by the specialist dealer; ** Seat surface and backrest 46 | Ottobock B500 classic/advanced...

  • Page 47: Manual Seat Functions

    The power wheelchair with standard or contour seat can be The power wheelchair with standard or contour seat can be equipped with a manual back angle adjustment function. equipped with a manual seat tilt function. B500 classic/advanced Ottobock | 47...

  • Page 48: Manual Elevating Footrests

    Compared to the standard seat, the contour seat provides The manual elevating footrests make it possible to prevent a the user with improved comfort and lateral support. constant pressure load or to provide anti-shock support. 48 | Ottobock B500 classic/advanced...

  • Page 49: Recaro® Seat

    ► Note that the maximum backrest angle is 30° while → The headrest is removed. standing and 20° while driving. The power wheelchair can be equipped with various Recaro® seat models. They provide individually adjustable, comprehensive seating comfort. B500 classic/advanced Ottobock | 49...
  • Page 50 3) Remove the Recaro® seat. → The Recaro® seat has been removed. Attaching the Recaro® seat to the mobility base CAUTION Recaro® seat not locked in place Risk of tipping 50 | Ottobock B500 classic/advanced...

  • Page 51: Headrest

    This information only applies to the Recaro® LT model. 1) Turn the knob on the side of the backrest forward. → Both lateral supports are moved closer together. 2) Turn the knob on the side of the backrest backwards. B500 classic/advanced Ottobock | 51...

  • Page 52: Control Unit Accessories

    The separate control panel is height-adjustable and removable. For the standard and contour seats, the attendant control is located on the backrest cross tube. For the Recaro® seat, the attendant control is located on the headrest. 52 | Ottobock B500 classic/advanced...
  • Page 53 3 Mode (LED indicator) 6 Joystick Continue driving slowly [On/Off] Button Red/Orange/Green Charging process/Drive-away lock The button is used for switching the power wheelchair on, flashing alternately activating the drive-away lock and switching the wheelchair off. B500 classic/advanced Ottobock | 53...
  • Page 54 If the seat functions are accessed with the [Mode] button, Display Information then the joystick is used to select and activate the seat func­ Power back angle adjustment tions (see Page 39 ff.). 54 | Ottobock B500 classic/advanced...

  • Page 55: Push-Button Module

    Power footrests, coupled tions (see Fig. 34, item 1) can be controlled during normal driving operation: Display Information Other special functions (combinations) Power seat height adjustment S1 – S5 B500 classic/advanced Ottobock | 55...
  • Page 56 1 Available power functions back of the push-button module indicate the corresponding 2 [Mode] button functions. 3 Selected function (LED indicator) 4 [Selected function up/down] buttons (see information box) 5 Jack plugs for connecting Piko buttons 56 | Ottobock B500 classic/advanced...

  • Page 57: Adapter Cable For Piko Button

    1) Apply slight pressure to push the control panel holder to odometer. the side. It is connected to the control panel guard. → The pivot element is unlocked. Additional information on using it can be found in the manu­ facturer's instructions for use. B500 classic/advanced Ottobock | 57...

  • Page 58: Lights

    1) Loosen the mounting screws. and current can flow (see Fig. 38, right). 2) Adjust the height of the control panel holder. To replace broken lamps: see Page 74. 3) Tighten the mounting screw. 58 | Ottobock B500 classic/advanced...

  • Page 59: Belts / Belt Systems

    ► Always wear the safety belt / lap belt when driving in public. CAUTION Putting the lap belt on incorrectly Fig. 39 Putting the lap belt on Risk of pressure points, constriction ► Ensure that the buckle lies in the middle of the body. B500 classic/advanced Ottobock | 59...
  • Page 60 ► When driving in public areas, always wear the four- point or chest belt for additional support. ► Under no circumstances may the belt system be used as part of a restraint system for transportation in a wheelchair accessible vehicle. 60 | Ottobock B500 classic/advanced...

  • Page 61: Suspension (Steering Casters/Drive Wheels)

    Adjusting the belt length The user sits upright or lies in the power wheelchair. > 1) Close the belt. 2) To lengthen: Turn the length adjustment buckle by 90° Fig. 41 Steering caster suspension and pull. B500 classic/advanced Ottobock | 61...

  • Page 62: Locking The Steering Casters

    → The bolt at the bottom edge of the front frame extends The bumper provides increased user protection in case of a and engages with the front fork as soon as the power collision. wheelchair faces straight ahead (see Fig. 43, left). 62 | Ottobock B500 classic/advanced...

  • Page 63: Overview Of Additional Options

    Footrests or armrests may not a maximum height of 100 mm be used as lifting points. • Puncture-proof tyres: Solid rubber tyres • Seating shell adapter: To attach special seating shells; control panel holder for seating shells also available B500 classic/advanced Ottobock | 63...

  • Page 64: Reducing The Transportation Size

    1) Pull on the backrest release strap. ► The power wheelchair must be secured in accordance 2) Remove the side panels. with the regulations for the transport device. 3) Pull the release strap back. 64 | Ottobock B500 classic/advanced...

  • Page 65: Reducing The Transportation Size - Recaro® Seat

    3) Remove the cross bolt from the bracket. 3) Engage the brake. 4) Fold the backrest forward on to the seat surface. 4) Use the eyebolts and cargo straps to attach the power wheelchair to the means of transportation. B500 classic/advanced Ottobock | 65...

  • Page 66: Use In A Wheelchair Accessible Vehicle

    This is the only way Ottobock products in wheelchair accessible vehicles, order to provide optimal protection for the occupants in case number 646D158. of accident. ► Never transport more than one person in the power wheelchair. 66 | Ottobock B500 classic/advanced...

  • Page 67: Restrictions For Use

    ► Check the driving behaviour of the product after clean­ The weight of the person being transported is limited to max. 100 kg in a wheelchair accessible vehicle. ing it. B500 classic/advanced Ottobock | 67...

  • Page 68: Disinfection

    • Prior to disinfection, clean the seat and back upholstery, seat cushion, control panel and armrests. NOTICE Failure to inspect important product features Damage to the product 68 | Ottobock B500 classic/advanced...

  • Page 69: Maintenance

    For the components, special attention must be paid to the following points in the maintenance table below: • Functionality of the components • Correct adjustment of the components • Damage, deformation • Tightness of screw connections B500 classic/advanced Ottobock | 69...

  • Page 70: Maintenance Intervals

    Visually inspect the piston rod for scratches and oil leaks Padding/belts Ensure padding is in perfect condition Check the safety belts for wear Check belt buckle for functionality Tyres Check air pressure (see tyre sidewall) 70 | Ottobock B500 classic/advanced...
  • Page 71 Check whether mounting screws are fastened properly rest Check whether screw connections between the armrest and the control unit are tight Check armrest for damage Gas compression Visually inspect the piston rod for scratches and oil leaks spring or actuator B500 classic/advanced Ottobock | 71...

  • Page 72: Repair

    1) Lift the seat cushion from the seat plate. 3) Open the clip on the strap. 2) Remove the seat bottom. 4) Remove the battery drawer cover. 3) Open the clip on the battery tray strap. 4) Remove the battery tray cover. 72 | Ottobock B500 classic/advanced...
  • Page 73 3) Push the drawer under the seat until the release bolt 4) Close the fuse holder cover until you feel it engage. engages. INFORMATION: As you close the battery drawer, ensure that the release bolt engages correctly in the intended notch. B500 classic/advanced Ottobock | 73...

  • Page 74: Replacing A Defective Bulb

    3) Turn the defective bulb slightly to unlock it and then remove it. 4) Grasp the new bulb with a cloth, insert it into the socket and lock it in place. 5) Position the cover, hook it on and press it down tightly. 74 | Ottobock B500 classic/advanced...

  • Page 75: Replacing The Battery

    Faults are indicated on the LCD display via the "Battery Batteries may only be replaced by authorised personnel. Capacity" indicator on the control panel or on the attendant control (if available). The following table shows the individu­ B500 classic/advanced Ottobock | 75...

  • Page 76: Types Of Notifications

    However, the driving function is still available. Fault A fault impairs one or several functions of the power wheel­ chair. The power wheelchair and its functions are not fully operational until the fault is resolved. 76 | Ottobock B500 classic/advanced...

  • Page 77: Wheelchair Control Unit Fault Overview

    Battery undervoltage Battery deep discharge Charge as soon as possible Battery cable malfunctioning Check the connection to the battery or faulty connection to the (charge the battery if the connection battery is good) B500 classic/advanced Ottobock | 77...
  • Page 78 Contact specialist dealer Defective drive motor Brake fault Brake disabled Close brake release Defective brake Contact specialist dealer Emergency stop Severe controller/hand-held Check cabling/plug connections control unit and/or drive Contact specialist dealer motor malfunction 78 | Ottobock B500 classic/advanced...

  • Page 79: Attendant Control Fault Overview

    Faulty cabling or plug con­ Check cabling/plug connec­ tom are flashing fault tact tions Defective actuator Contact specialist dealer Backrest/seat bottom LED is Power seat function temper­ Overheating due to excessive Cool down phase flashing ature warning load B500 classic/advanced Ottobock | 79...

  • Page 80: Disposal

    5 years, provided that it is used of conformity was therefore created by the manufacturer properly and that the service and maintenance instructions with sole responsibility according to appendix VII of the guidelines. 80 | Ottobock B500 classic/advanced...

  • Page 81: Warranty Terms

    Should trademarks in this accompanying document fail to be explicitly identified as such, this does not justify the conclu­ sion that the denotation in question is free of third-party rights. B500 classic/advanced Ottobock | 81...

  • Page 82: Appendices

    Armrest height (telescoping armrest) 225 - 350 mm; standard seat, junior: 205 - 275 mm Armrest length (standard) 260 mm Back angle -9/1/11/21° or 0/10/20/30° Overall width 645 mm Overall height 1030 mm Overall length 1080 mm Weight when empty* 95 kg 82 | Ottobock B500 classic/advanced...
  • Page 83 ** For further limitations pertaining to maximum load capacity please refer to the order form. *** = 3-point turn by 180° Electrical system* IP protection rating (according to DIN EN IPX4 60529) Operating voltage 24 V Batteries: Gel (standard) 2 x 12 V; 63 Ah (C5) AGM (optional) 2 x 12 V; 63 Ah (C5) B500 classic/advanced Ottobock | 83...
  • Page 84 Climbing ability, basic model*: 9.5° (17%) Approved climbing ability with lowered seat height adjustment feature/seat tilt: max. 6° (10%) Maximum obstacle height 50 mm (100 mm with curb climbing assist) Range (on level surfaces)** approx. 35 km 84 | Ottobock B500 classic/advanced...
  • Page 85 50%. For information on this, see the section "Range" in the instructions for use (user). *** The braking distance can be correspondingly longer due to user weight, installed options and condition of the tyres, and due to weather and surface conditions. Corrosion protection Corrosion protection Coated frame B500 classic/advanced Ottobock | 85...
  • Page 86 86 | Ottobock B500 classic/advanced...
  • Page 87 Africa Otto Bock HealthCare Otto Bock Algérie E.U.R.L. Otto Bock France SNC Otto Bock Polska Sp. z o. o. Otto Bock de Mexico S.A. de C.V. Otto Bock Korea HealthCare Inc. Deutschland GmbH 91978 Courtaboeuf Cedex 61-029 Poznań · Poland Mackle-Ben Aknoun · Alger C.P.
  • Page 88 Ihr Fachhändler | Your specialist dealer Versandanschrift für Rücksendungen/Adress for Returns: Otto Bock Manufacturing Königsee GmbH Lindenstraße 13 · 07426 Königsee-Rottenbach/Germany Otto Bock Mobility Solutions GmbH Lindenstraße 13 · 07426 Königsee-Rottenbach/Germany T +49 (0) 69 9999 9393 · F +49 (0) 69 9999 9392 ccc@ottobock.com ·...

Table of Contents

Save PDF