Push-Button Module - Otto Bock C1000 SF Instructions For Use Manual

Hide thumbs Also See for C1000 SF:
Table of Contents

Advertisement

6.12.3 Push-button module

The power wheelchair can be ordered and equipped with a
push-button module. The installation position of the push-
button module may have to be adjusted so that the user can
reach it easily.
The instructions for use (user) contain information on oper­
ating the push-button module.
6.12.4 Special controls
The power wheelchair can be ordered and equipped with
special controls.
Special controls which are already installed may have to be
fitted to the user's specific requirements. Information on fit­
ting the special controls to the user, programming and oper­
ation is contained in further Ottobock documents (e.g.
647G636).
7 Delivery
7.1 Final inspection
A final inspection must be performed before delivery of the
power wheelchair:
Are all options installed according to the order form?
Was the product fitted optimally to the physical and
mental condition of the user (seat, armrests, footplate,
control panel, additional controls)?
Are the batteries charged?
C1000 SF
Is the tyre pressure correct (see tyre sidewall and the
section "Technical data" for information)?
Do all manual and power functions work properly?
When the seat retaining straps are inserted, are the
stand-up function and the "tilt" function (if installed)
blocked?
Do all control functions work properly?
Do the brakes work?
If intended: Are all options required to take part in road
traffic installed and fully functional (e.g. warning tri­
angle, lights, warning flashers)?
7.2 Transport to the customer
CAUTION
Securing the power wheelchair insufficiently during
transport
Crushing, pinching of body parts due to failure to observe
transportation instructions
► During transportation in vehicles or aircraft, on lifting
platforms or in lifts, turn the control unit of the power
wheelchair off and lock the brake.
► The power wheelchair must be secured in accordance
with the regulations for the transport device.
► During transport in a vehicle, the power wheelchair
must be secured sufficiently with cargo straps. Only
attach the cargo straps to the corresponding transport­
ation eyelets and specified tie-down points.
Delivery
Ottobock | 25

Advertisement

Table of Contents
loading

Table of Contents