Push-Button Module - Otto Bock B500 classc Instructions For Use Manual

The currently selected seat function is indicated on the con­
trol panel display (see Page 44 et. seq.) and by the follow­
ing LEDs on the attendant control:
Display Information
Power back angle adjustment
Power seat tilt
Power seat height adjustment
Coupled power seat adjustment
(backrest and seat tilt)
Moving the joystick right switches between the different
seat functions. The respective function can be extended or
retracted by moving the joystick forward or back (see
Page 44 et. seq.).
The corresponding LEDs flash if an error occurs (see
Page 89).
B500 classic/advanced
Joystick
The joystick is used for driving. The further it is moved away
from the centre position, the faster the power wheelchair
will drive in this direction.
If the seat functions are accessed with the [Mode] button,
then the joystick is used to select and activate the seat
functions (see Page 44 et. seq.).

6.11.2 Push-button module

WARNING
Risk of uncontrolled driving behaviour
Risk of falling, tipping, collision with persons or nearby
objects
► Note that no changes of any kind may be made to the
push-button module by the user. Programming of the
push-button module may only be performed by
trained, authorised personnel.
Power wheelchairs with the enAble50 control unit can be
equipped with an optional push-button module.
The push button module lets the user select additional
power seat functions directly during normal driving opera­
tion.
03/2011
Operation
Page 59