Operating The Wheel Lock; Lifting The Rehab Buggy; Using The Cover For The Back Support Folding Scissor Mechanism - Otto Bock Lisa Instructions For Use Manual

Hide thumbs Also See for Lisa:

Table of Contents

Available languages

8.2.4 Operating the wheel lock

Insufficient braking

Accident, falling of the user due to loss of braking function

► Verify the functionality of the wheel lock prior to every use.

1) Engage the wheel lock: Press the release lever down with your foot (see fig. 18).

2) Release the wheel lock: Pull the release lever up with the tip of your foot (see fig. 19).

1) Screw the tip-assist to the rear frame on the left or right side.

2) To tilt the rehab buggy, place one foot on the tip-assist and pull the buggy towards you (see fig. 20).

The folding scissor mechanism of the back support is covered with a pocket-type cover (see fig. 21). The pocket

can only carry soft or small objects as these come into close proximity with the frame tubes when the back support

is at maximum inclination.

Table of Contents