Footrest; Fig. 16 Footrest Lock - Otto Bock A200 Instructions For Use Manual

Changing the control panel side
INFORMATION
The change of the control panel side may only be carried
out by authorized personnel.
The standard configuration has the control panel mounted
on the right side. If desired by the user, it can be also mount-
ed on the other side of the wheelchair.

6.1.5 Footrest

CAUTION
Risk of pinching. Make sure your fingers are not in the
danger area when flipping the footplates up or down.
Complete removal of the footrest is permitted only for
transportation of the wheelchair.
Removal
1. Remove the calf band.
2. Flip the footplate up, release the footrest lock (see
fig. 16) and swing the footrest either to the inside or out-
side.
3. Pull the footrest up to remove it.
A200
Reassembly
1. Reinsert the footrest from above by placing it in the
holding device and swinging it forward until the footrest
lock engages.
2. Reattach the calf band to the holding device.
Fig. 16 Footrest lock
Adjusting the lower leg length (see Fig. 17)
1. Loosen the screws on the footrest bar.
2. Move the footplate up or down to adapt the height to the
individual lower leg length and seat cushion thickness.
3. Retighten the screws.
Operation
Ottobock 103
|