Footrest; Fig. 10 Footrest Lock - Otto Bock B400 Instructions For Use Manual

Operation

6.1.4 Footrest

CAUTION
Risk of getting pinched. Make sure your fingers are not in
the danger area when flipping the footplates up or down.
Complete removal of the footrest is permitted only for
transportation of the wheelchair.
Dismantling
1. Remove the calf band.
2. Flip the footplate up, release the footrest lock (see
fig. 10) and swing the footrest either to the inside or out-
side.
3. Pull the footrest up to remove it.
Reassembly
1. Reinsert the footrest from above by placing it in the hold-
ing device and swinging it forward until the footrest lock
engages.
2. Reattach the calf band to the holding device.
28 | Ottobock
Fig. 10 Footrest lock
Adjusting the Lower Leg Length (see fig. 11)
1. Loosen the Allen head screws on the footplate bar using
a size 5 Allen key.
2. Move the footplate up or down to adapt the height to the
individual lower leg length and seat cushion thickness.
3. Retighten the screws.
The footrest bar must not be pulled out of the
INFORMATION
holding device by more than 160 mm.
B400