Information Checklist; Enable The Usb Port; Usb Printer Port - Xerox WorkCentre 5755 System Administrator Manual

USB Printer Port

The optional USB Printer Port provides a USB connection on the device for Walk-up printing. The USB
Printer Port can be used for printing directly from a workstation or laptop connected with a USB. The
USB port is located at the back of the device.

Information Checklist

Before starting the procedure, ensure the following items are available or tasks have been performed:
• The USB cable.
• The Print and Fax Driver disk delivered with your device.

Enable the USB Port

At Your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [Connectivity] link.
2. Click on the [Physical Connections] link.
3. Select [USB Port] in the directory tree, the USB Port page displays.
In the General area, for Connection Mode select [Direct Printing Via Driver].
a.
b. Enter time in seconds in the [Timeout] field. The default is 10 seconds, the range is 0 - 60.
c. Click on the [Apply] button.
d. Click on the [OK] button when you see the message "Properties have been successfully
modified".
4. Click on the [Status] tab.
5. Select [Description and Alerts] from the directory tree.
6. Click on the [Reboot Machine] button.
7. Print a Configuration Report At the Device:
a. Press the <Machine Status> button.
Touch the [Machine Information] tab.
b.
c. Touch [Print Reports].
d. Touch [Print Report].
e. Touch [Close]
Access Internet Services as System Administrator
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
25
on page 16.
System Administrator Guide
329