General Setup; Administrator Tools Password; Configuration Page; Configuration Report - Xerox WorkCentre 5755 System Administrator Manual

General Setup

Administrator Tools Password

The Administrator password is required to access the administrator tools function both from the device
touch screen and Internet Services. Access to the administrator tools is necessary to configure the
device, network connectivity and optional settings.
Note: Note that certain area on the web user interface (Internet Services) is protected by the
Administrator password, this will require you to log in with the User ID and Password, the default is
admin and 1111, BEFORE modifying any settings. After working with settings, make sure to log
out by clicking on [admin-Logout] in the upper-right corner of the Internet Services screen, then
click on the [Logout] button.
We recommend that you change the Administrator password immediately after device installation. A
password of at least nine characters in length should be sufficient. When changed, ensure the
password is kept in a secure place for future use.

Configuration Page

The Configuration page allows you to view device setup details, for example Network Setup and
Workflow Scanning Setup.
Note: These details can also be printed by clicking on the [Print Configuration Page] button.
1. At your Workstation, open the web browser and enter the IP Address of the device in the Address
bar, and press <Enter>.
Click on the [Status] tab.
2.
3. Select [Configuration] in the directory tree.
4. To view information about a setting select the required configuration setting from the list.
5. To print the Configuration details, click on the [Print Configuration Page] button.

Configuration Report

Note: The following instructions are assuming that printing a Configuration Report is open to all
users.
The Configuration Report details the device software versions and network settings configured for the
device. The Configuration Report automatically prints when the device is rebooted or switched on. You
can print a Configuration Report by following the instructions below.
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
3
21