Xerox WorkCentre 5755 System Administrator Manual page 195

To Disable or Enable Immediate Image Overwrite
At the Device
Note: To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to
1. From the Tools pathway, touch [Service Settings].
2. Touch [Optional Services].
3. Touch [Image Overwrite Security].
4. Touch [Enable] or [Disable], then touch [Save]. The change in status will be immediately
effective.
5. Press the <Log In/Out> button.
Touch [Logout] to exit the Tools pathway.
6.
Immediate Image Overwrite Status
When Immediate Image Overwrite is configured on the device any job that is overwritten will have its
overwrite status displayed in the Completed Jobs queue details window.
To view Overwrite Status at the Device
1. Press the <Job Status> button.
2. Touch the [Other Queues] button (if necessary).
3. Touch the drop-down menu and select [All Completed Jobs].
4. Touch a job in the queue.
View the Immediate Overwrite status under Value. This will appear as Successful or Failed.
5.
6. Touch [Close].
Access Tools Pathway as a System Administrator
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
on page 10.
System Administrator Guide
Security
187