Xerox WorkCentre 5755 System Administrator Manual page 142

Print Drivers
7. Enter the IP Address of the printer.
8. Enter a name for the print queue and click [OK].
9. You will be prompted for a Print Driver. Select [Have Disk] and browse to the location of your Print
Driver.
10. Select the [.INF] file then click on [Open].
11. The wizard will return you to the previous dialog. Verify the path and file name are correct and
click on [OK].
12. Select the model that corresponds to your device and click on [Next].
13. The Name your Printer screen appears. Enter a printer name. Select [Yes] if you wish to make this
the default printer, then click on [Next].
14. The Printer Sharing screen appears. If you will be sharing this printer with other clients select the
[Share As] button and enter a share name. Click on [Next].
15. Enter a location and comment (optional).
16. Select [Yes] to print a test page and verify that it prints at the device. Click [Next].
17. Click on [Finish].
Configure the Print Driver
1. From the [Start] menu, select [Settings] and then [Printers].
2. Right-click on the printer icon and select [Properties].
3. Click on the [Configuration] tab.
4. Change the settings you wish to set for the printer.
5. Click on [OK].
For further information on Configuring the Print Driver and Installation, refer to the Print Drivers Guide
for Windows CD.
134 Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide