Fax Transmission Defaults - Xerox WorkCentre 5755 System Administrator Manual

Embedded Fax
4. Touch [Save] to return to the Incoming Default Settings screen.
Default Output Options
This option allows you to select the finishing options which will be applied to the incoming fax
documents.
1. From the Incoming Default Settings screen, touch [Default Output Options] icon.
2. The Default Output Options screen displays. Select one of the following options:
• Staple - this option allows staples on the incoming fax document to be positioned according
to the paper orientation specified in Tools pathway. If the incoming document does not
match this orientation, the position of the staples may not be as expected.
Punched - this option allows punch holes on the incoming fax documents will be positioned
•
according to the paper orientation specified in the Tools pathway. If the incoming document
does not match this orientation, the position of the punch holes may not be as expected.
• Duplex - this option allows the incoming faxes to be printed on both sides of the pages in
Head to Head orientation. If the incoming document does not match this, the orientation
may not be as expected.
3. Touch [Save] to return to the Incoming Default Settings screen.
Advanced Capabilities
This option when enabled allows the full use of the capabilities of the fax card, it improves document
transmission speed and resolution. This feature may prevent successful fax reception from older
devices.
When disabled, it improves the compatibility with older devices for fax reception.
1. From the Incoming Default Settings screen, touch [Advanced Capabilities] icon.
2. The Advanced Capabilities screen displays. Select either [Enable] or [Disable].
3. Touch [Save] to return to the Incoming Default Settings screen.

Fax Transmission Defaults

This feature allows you to set the outgoing fax settings.
At the Device:
Note: To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to
1. From the Tools pathway, touch [Service Settings].
2. Touch the [Fax Settings] to display the Fax Settings screen.
Select [Fax Transmission Defaults] to display the Fax Transmission Defaults screen.
3.
268 Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
Access Tools Pathway as a System Administrator on page 10.